Tag: resin8

Top Tip…Setting hair in resin

We get asked all the time about what can be set in resin (hair, ashes, body parts, etc)…

So this morning we got busy with the scissors, chopped Kate’s hair off and set it in this silver plated pendant mount (after having made a backing of white pearl resin).

Key point – once set in resin hair will look visibly darker (as it does when you get out of the shower)

Resin8 - setting hair in resin
Resin8 – setting hair in resin

Top Tip…Use a square-ended mixing stick

Here’s another in our selection of top tips. This one is great for making sure that your resin is mixed really well:

Resin8-Square-Ended-Stick

By cutting a pre-used mixing stick (lollipop stick) that has already had resin on it you will avoid getting any splinters when you make your cut.  Having the square end means you can get right to the edges when stirring your resin therefore making sure that the resin is mixed really well.

How to…remove bubbles from resin

We’re always asked how to get rid of bubbles that have formed in resin (before the resin has cured that is!).

Well, if they’re really large bubbles there’s no choice – you will have to have a dig around with a cocktail stick (toothpick) and see if you can pop them.  However if the bubbles are tiny try this:

Removing-Bubbles

Safety alert – ONLY DO THIS IS YOU ARE USING NON-FLAMMABLE RESIN. We do not advise you do this with alcohol inks unless you want to lose your eyebrows.

Now, you only need to flash the flame over the resin for a second or two. Don’t linger! Also, make sure you do this on a heatproof surface. In the image above we’ve used a heat-proof mat but you could also use a silicone mat, kitchen/bathroom tile or something like an old baking tray.

For those who enjoy the science….the flame starves the bubbles of oxygen therefore drawing them to the surface where they pop and vanish.

Give it a go next time you’re making something with our resin – it will be the best thing you’ve learnt today!