Who doesn’t love a fabric and resin bangle?! We’ve all been there – the resin soaks into the fabric, it warps, distorts and even bleeds colour into the lovely clear resin. Well no more…!!!
Simply cover both sides of the fabric with PVA glue or Mod Podge, leave it to dry and hey presto – you can now cut the fabric easily – it won’t fray, warp or distort AND it won’t bleed colour into the resin!
We like to add a layer of doming resin to the back of castings, so that they are smooth to wear against the skin. When doing this, it’s important to make sure that the casting is level before you add doming resin.
A handy tip is to use a mini spirit level (as you can see this one was from the RNLI, but we’re sure you can find them on ebay or etsy). This way the casting will have a level back, and look super professional!
If you have a curing cabinet do not use it if your resin creations have paper in them. As paper contains air, the action of heating the piece of jewellery up means that the air is released into the resin in the form of bubbles. OH NO!
Instead, pass a flame quickly over the piece before leaving it to cure overnight in a warm, dust-free environment.
Here’s another in our selection of top tips. This one is great for making sure that your resin is mixed really well:
By cutting a pre-used mixing stick (lollipop stick) that has already had resin on it you will avoid getting any splinters when you make your cut. Having the square end means you can get right to the edges when stirring your resin therefore making sure that the resin is mixed really well.