12mm Charm Silicone Bead Mould

12mm Charm Silicone Bead Mould

Stock Status: In Stock
6 x 12mm beads
You will earn 4 points with this purchase
A squat round bead mould made of high quality flexible silicone. With a bright, shiny interior, this bead mould will make 6 beads measuring 12mm in diameter, each with a 2mm hole through the middle. Please note - this particular mould is designed to fit onto a 1.5mm bracelet chain, NOT a Pandora-style 3mm chain.

This silicone mould is high quality and durable - you shouldn't need a release agent.

Dimensions of each bead - 12mm diameter
Diameter of the inner hole - 2mm (smaller than standard european style bead cores)
Finished items shown as example only - silver grommets not included! 

A set of beads takes approximately 5ml of resin to fill. 

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape: