140x100mm Small Rain Cloud Coaster

140x100mm Small Rain Cloud Coaster

Stock Status: In Stock
make cute coasters
You will earn 6 points with this purchase
This flat Small Rain Cloud Mould has a smooth interior and can be used to make a large decoration base, hanging decoration, coaster and more. Use it with epoxy resin or with Sculpt & Cast for different finishes.

Dimensions: 140mm x 100mm (at its widest points) x 12mm depth. 
This mould takes approximately 110ml of resin to fill. 

If using to make a resin coaster, we recommend using a clear layer of heat-resistant resin first in your mould, letting that set and then adding more resin with colour, ink, glitter, etc. This helps to boost the heat-resistance of the resin. Remember too that our heat-resistant resin needs at least 7 days to achieve full cure.

If using to make a Sculpt & Cast coaster, remember to seal the coaster before use to make it less porous. Use specific Sculpt & Cast pigments to colour the material.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    140mm x 100mm
  • Material:
    Silicone Mould
  • Type: