180x130mm Silicone Placemat Tile Mould - Rectangle

180x130mm Silicone Placemat Tile Mould - Rectangle

Stock Status: In Stock
Perfect for petri art
You will earn 16 points with this purchase
This mahoosive flat rectangular mould has a smooth interior and can be used to make a giant coaster or tile. Use our heat-resistant resin to make glorious coasters to give to friends and family as gifts or sell at craft fairs. 

Dimensions: 180mm x 130mm x 10mm depth.
This mould takes approximately 200ml of resin to fill. 

We recommend using a clear layer of heat-resistant resin first in your mould (if you will be flipping it once cured), letting that set and then adding more resin with colour, ink, glitter, etc. This helps to boost the heat-resistancy of the resin. Remember too that our heat-resistant resin needs at least 21 days to achieve full cure.

Have you tried the alcohol ink drop in a coaster? It's super-popular at the moment! Just search "resin petri art" in your browser's search engine. 

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    190mm x 150mm x 10mm depth
  • Material:
    Silicone Mould
  • Type:
  • Design: