23mm Faceted Heart Pendant Mould - No Drill

Stock Status: In Stock
23mm wide
You will earn 3 points with this purchase
This faceted heart pendant mould casts a small, cabochon heart shape for use in jewellery projects. Translucent, so you can see what you're casting, this mould has a super shiny interior and produces a gorgeous small pendant with pre-drilled hole!

23mm x 23mm
8mm deep
1.5mm hole

This mould takes approximately 5ml of resin to fill. 

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    23mm x 23mm x 8mm depth
  • Material:
    Silicone Mould