3-D Hexagonal Trinket Box with Lid

3-D Hexagonal Trinket Box with Lid

Stock Status: In Stock
Unusual and unique
You will earn 9 points with this purchase
A must-have Hexagonal Trinket Box with Lid mould that creates a simply stunning 2-part trinket dish for holding all sorts of secrets. Use it as babies first teeth storage or on your bedside table as a jewellery holder.

Outer dimensions of casting: 68mm x 78mm x 34mm depth (approx)
Inner dimensions of casting: 62mm width x 70mm length x 30mm depth (approx)
When both sections of the casting are together the overall depth is approx 40mm.

The main part of this mould takes approx 55ml of resin to fill. The lid takes only 17ml.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep them in the bag they come to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    68mm x 78mm x 34mm depth
  • Material:
    Silicone Mould
  • Type:
    Trinket Dishes & Boxes
  • Design: