3 Pendant Moulds in 1

3 Pendant Moulds in 1

£4.50
Stock Status: In Stock
36mm long
Facebook
Instagram
Youtube
Twitter
Pinterest
You will earn 4 points with this purchase
Information
Gorgeous triple tubular moulds for making pendants, earrings and more. Bubble free, translucent (so you can see what you're casting) and flexible, these silicone molds are high quality and durable. Fill these with resin and glitter, colour them with bright or dark colours and add mini screws to the top so you can thread a cord or chain.

In either cylindrical or hexagonal form, each mould makes 36mm long castings ranging from 6mm to 10mm diameter.

The triple cylinder mould takes approximately 7ml of resin to fill. 
The triple hexagon mould takes approximately 5ml of resin to fill. 

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.

Top tip - use warm soapy water in a bowl to de-mould the castings from these tubes. 
Specifications
  • Product Code:
    SM208
  • Shape:
    Pendant
  • Dimensions:
    6-10mm x 36mm
c