This puffy 3D Cloud Silicone Mould should give you the 'silver lining feeling' you need for your next project! Create pretty trinkets, encase special dried flowers or attach magnets to create your own memo-holoders.
Dimensions of finished piece: 45mm x 30mm x 20mm
Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. A top tip for this is to demould in some warm soapy water.
If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.