80mm Square Water Bubbles Mould

80mm Square Water Bubbles Mould

£5.25
Stock Status: In Stock
unique and unusual
Facebook
Instagram
Youtube
Twitter
Pinterest
You will earn 5 points with this purchase
Information
This flat 80mm Water Bubbles Square Mould has a textured surface and is used to recreate a water bubble effect in resin. Use our coat-it 1 to 1 epoxy resin to make white or coloured bubbles which, when cured, you can cut using normal scissors and add to other resin work. 

Dimensions: 8cm x 8cm x 1cm depth.
This mould takes approximately 10ml of resin to fill. 
Top Tip: Use the side of a lolly pop stick to smooth the resin across when filling it to ensure an even fill.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
Specifications
  • Product Code:
    SM.025.018
  • Shape:
    Abstract
  • Size:
    80mm x 80mm
  • Type:
    Nature
  • Design:
    Beach
c