Notice for customers in the EU: We are temporarily unable to deliver to countries in the EU. We are working to re-enable the service as quickly as we can. Please check back for updates.

Basics Pin Vice & Drill Bits

Stock Status: In Stock
10 drill bits included (0.8 to 3mm)
You will earn 9 points with this purchase

Part of the Resin8 Basics collection, this is a 3.5" metal finger held drill for making holes in resin castings. With two double-ended collets, this small twist drill also comes with ten small drill bits.

  • Drill bit sizes: (0.8mm,1.0mm,1.2mm,1.5mm,1.8mm, 2.0mm, 2.2mm, 2.5mm, 2.8mm and 3.0mm).

Each collet is double sided and can be removed and flipped round for attaching alternative size twist drill bits. The second collet is inside the main body of the twist drill. Tighten the chuck to hold the drill bit in place.

This Basics Pin Vice & Drill Bits can also be used to make location holes in thicker resin pieces before using a high speed drill to prevent scratching and scuffing of the surface. 

  • Product Code: