Bubble Edge Trinket Dish Silicone Mould

Stock Status: In Stock
pretty and playful
You will earn 7 points with this purchase

This playful Bubble Edge Trinket Dish Silicone Mould creates a handy holder for the little bits and bobs scattered across your tabletops! Fill this intricate mould with bright neons and a dash of aurora glitter for a bit of sparkle, or use some transparent blues to make a splash!

Top tip: tease the resin into the droplets carefully using a cocktail stick (be careful not to scratch the inside of your mould). Demould slowly and carefully in warm soapy water - be very gentle when demoulding the droplet edge.

  • Dimensions of finished piece: 85mm across x 40mm high, 35mm deep
  • This mould takes approx 100ml of resin or 170g of JESMONITE to fill

How to look after your new mould: top tips from the Resin8 team

Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.

It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.

Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine. 

You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE? Resin-tired moulds make excellent moulds for working with JESMONITE​​​​​​​.  You can find more about this wonderful composite here.

  • Product Code:
  • Size:
    85mm across x 40mm high
  • Material:
    Silicone Mould
  • Type:
    Trinket Dishes/Boxes