Chandelier Dangle Drop Earring Mould: Twist

Chandelier Dangle Drop Earring Mould: Twist

Stock Status: In Stock
From 30 to 50mm
You will earn 4 points with this purchase
This Chandelier Dangle Drop Earring Mould makes 6 gorgeously twisted spindles with pre-drilled hole for adding to earrings and pendants. In our example we've gone neon for summer, but you could make these into ice-cool winter sparkle drops for a ball.

Each mould makes 6 spindles ranging from 30mm to 50mm long. 
Fittings not included. We used silver plated shepherd's hooks and 10mm jump rings, both available from our site.

This mould takes approximately 3ml of resin to fill. 

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    30mm - 50mm length
  • Type:
  • Design: