These Christmas Decoration Silicone Moulds are perfect for decorating your home this Christmas or gift a set of beautiful handmade baubles to that special family member or friend. Even better - they come with a pre-drilled hole so no need to drill one! Fill it with our eco-glitter and give to a loved one, or use the popular petri effect with alcohol ink to create colourful galaxy style castings.
- 69mm Star: 69mm wide x 58mm long x 8mm deep (takes approximately 35ml of resin of 60g of JESMONITE to fill)
- 69mm Star & Flower Cut-Out: 69mm wide x 58mm high x 8mm depth x 20mm cut-out (takes approximately 30ml of resin or 50g of JESMONITE to fill)
- 61mm Bauble: 62mm wide x 74mm high x 8mm deep (takes approximately 30ml of resin of 50g of JESMONITE to fill)
Looking for more shapes? Check out here
How to look after your new mould: top tips from the Resin8 team
Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.
It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.
Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.
If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE? Resin-tired moulds make excellent moulds for working with JESMONITE. You can find more about this wonderful composite here.