Cicada Insect Pendant Mould

Cicada Insect Pendant Mould

Stock Status: In Stock
goggleyed insect mould
You will earn 4 points with this purchase
Create a truly unique pendant with this Cicada Insect Pendant Mould. Use glitter for the top layer and then back it with black, perfect for pendants, brooches and even fridge magnets! Try dusting the inside of the mould with mica before filling with coloured resin.

Measurements: 43mm x 20mm
Depth of mould: approx 7mm
this mould takes approximately 5ml of resin to fill it.

Due to the detailed nature of this mould, make sure the resin goes into all the spaces (use a cocktail stick) and demould carefully. To aid bubble release, make sure you warm your resin before use.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    43mm x 20mm
  • Material:
    Silicone Mould
  • Type:
  • Design: