This 7 Piece Geometric Jewellery Mould is full of statement shapes which are a must for creating some new jewellery essentials! Try experimenting with JESMONITE® like us - you'll need to add some screw eye pins or drill a hole with a Dremel tool to be able to thread a chain through. This...
This 7 Piece Geometric Jewellery Mould is full of statement shapes which are a must for creating some new jewellery essentials! Try experimenting with JESMONITE® like us - you'll need to add some screw eye pins or drill a hole with a Dremel tool to be able to thread a chain through. This mould also doubles as a puzzle for the little ones (but we prefer to think about all of the fab jewellery we can make!!)
This mould takes approx 100ml of resin or 170g of JESMONITE®to fill.
Pieces vary in size - the smallest piece is 35mm wide and the largest measuring 75mm wide. For reference, the entire mould is approx 115 x 115mm. Each piece will be approx 10mm deep.
Top Tip: Use a cocktail stick to get into those sharp edges to minimise pesky air bubbles!
How to look after your new mould: top tips from the Resin8® team
Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully. Moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.
It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.
Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.
If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE®? Resin-tired moulds make excellent moulds for working with JESMONITE®. You can find more about this wonderful composite here.
Should you need a little more guidance, our FAQs provide lots of helpful information, as do our YouTube videos. You may also like to join our friendly Facebook group for help from our super customers.