A brilliant square bead mould made of high quality flexible silicone. With a bright, shiny interior, this bead mould will make 6 beads measuring 12mm or 16mm in diameter, each with a hole through the middle.
This silicone mold is high quality and durable - you shouldn't need a release agent.
Dimensions of each bead - 12mm or 16mm diameter
A set of 12mm beads takes approximately 10ml of resin to fill.
A set of 16mm beads takes approximately 40ml of resin to fill.
Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much.
If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.