Door Sign Silicone Moulds

Door Sign Silicone Moulds

Stock Status: In Stock
Perfect for making unique and special gifts
You will earn 8 points with this purchase
These gorgeous veoor Sign Moulds has a smooth interior and can be used to make long tiles or door plaques. Use our heat-resistant resin to make tiles that can be used as coasters/placemats, or our fill-it resin to make door plaques.

Choose from rounded ends or straight ends.
Dimensions: 250mm x 80mm x 10mm depth.
This mould takes approximately 220ml of resin to fill. 

We recommend using a clear layer of heat-resistant resin first in your mould (if you will be flipping it once cured), letting that set and then adding more resin with colour, ink, glitter, etc. This helps to boost the heat-resistancy of the resin. Remember too that our heat-resistant resin needs at least 21 days to achieve full cure.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
    Coasters & Petris
  • Type:
    Coasters & Petris
  • Dimensions:
    250mm x 80mm x 10mm depth