Faceted Crystal Silicone Paperweight Mould THREE

Faceted Crystal Silicone Paperweight Mould THREE

Stock Status: In Stock
6.5 x 4.5 x 4cm
You will earn 7 points with this purchase
This amazing translucent Paperweight Mould makes a 6.5 x 4.5 x 4cm faceted gem with shiny surfaces. You can see what you're casting due to the mould's transparency - ideal for creating layers or adding texture.

This mould takes approximately 110ml of resin to fill.

After much experimenting we find that by just putting a small amount of embellishment in the bottom (the top as you're filling) the facets gives an amazing effect and make the paperweight look different from all angles.

Check out our video here

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    65mm x 45mm x 40mm depth
  • Material:
    Silicone Mould
  • Type:
  • Design: