Faceted Silicone Crystal Pendant Mould Pair - No Drill

Faceted Silicone Crystal Pendant Mould Pair - No Drill

£3.95
Stock Status: In Stock
no need to drill!
Facebook
Instagram
Youtube
Twitter
Pinterest
You will earn 3 points with this purchase
Information
This translucent silicone pendant mould has a beautiful faceted crystal finish, and makes casting gorgeous solid resin gems easy and fun. These diamond effect gems are perfect as a matching set of pendants (as they have a pre-drilled hole) and earrings. 

Large: 43x17mm (6mm deep)
Small: 33x14mm (8mm deep)

Each pendant takes approximately 5ml of resin to fill. 

Finished gems shown as example only.

You will be able to use your silicone mould over and over again provided you look after it and treat it with care. It is translucent so you can see what you are filling the mould with, and you get what you pay for - superior quality, ease of use and minimal need for finishing. 

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
Specifications
  • Product Code:
    SM.008.011
  • Shape:
    Crystals & Gems
  • Dimensions:
    Small: 33mm x 14mm x8mm depth, Large: 43mm x 17mm x 6mm depth
c