You want something crystal-clear with NO bubbles? This is the one for you. Perfect for creating and preserving special memories, fill-it is a real take-your-time resin made for pouring at depth. Use this slow-curing resin for sculpture, casting wedding flowers and river tables. 🌼
This fill-it epoxy casting resin tester kit has all the essentials for your very first go with our crystal clear casting resin. In its Resin8 branded wrap, the contents of this great beginners bundle include:
- Resin8 fill-it epoxy resin 150ml kit - 100ml of resin and 50ml of hardener
- 1 pair nitrile gloves - essential for protecting your skin against chemicals
- 2 graduated mixing cups - essential for measuring out
- 1 x 60ml graduated cup - great for mixing the resin and hardener together
- 3 x mixing sticks - great for stirring and can be re-used over and over again
- Basic instructions on how to measure, mix and create with epoxy resin
Please note, this kit does NOT include step-by-step instructions or any moulds.
Oh so stunningly clear, fill-it epoxy resin is the perfect choice for deep pouring transparent castings where crystal clarity is of utmost importance. Vegan-friendly, VOC, BPA and cruelty free, fill-it is our slow curing deep cast epoxy resin.
Use fill-it resin for river tables, model making & sculpture, wood turning and, of course, botanical casting for preserving floral treasures - it really is the bee’s knees! The flower preservationists favourite resin, fill-it is made for capturing memories - for inspo, check our our video ☝️
With a super low viscosity (it’s runny folks), fill-it has a 2:1 mix ratio, cutting edge anti-yellowing tech built in, and a clever-as-you-like bubble release action. It takes 3-4 days to set and you can pour up to 50mm each layer.
When you thought it just couldn't get any better, we've knocked it out of the park with this fact... Fill-it is made from materials that would otherwise enter landfill (as it's a by-product of the oil industry). So, buying our deep casting epoxy resin means you can create beautiful pieces whilst preventing waste and looking after the planet. Now that is SUPER-COOL.
There is no such thing as a silly question, and because we're just nice like that, we've compiled a hugggggeeee long list of FAQs about our resins especially for you to read through while you're warming your resin - check them out here.
👇THE INSTRUCTIONS, SMALL PRINT AND SCIENCEY BIT 👇
It is your responsibility to ensure you have read all of the health & safety information provided below. If you're looking for techy stuff, please check out the TDS, and for H&S please check out the MSDS. Take a look at our Health & Safety page for more general info on working with epoxy.
Resin8 fill-it epoxy resin is a modern formulation of the safest epoxy chemicals available. However, all epoxy resins are chemicals and they do come with Health & Safety implications and instructions, for which it is your responsibility to follow:
- You MUST wear nitrile gloves (or use a specialist resin barrier cream on your hands and unprotected skin).
- You MUST wear a respirator when sanding partially-cured resin. You do not need to wear one when pouring this resin.
- Work with this resin in a well ventilated room (open the window, door, etc).
- We advise you to wear safety goggles.
- Avoid skin contact.
- We advise against eating, drinking or smoking while working.
- In case of eye contamination wash with plenty of water for 15 minutes and consult medical advice immediately.
- Fill-it Part A does not like the cold, and you may find that it crystallises in the bottle. This is just the same as with honey, and can be easily rectified by placing the resin bottle (Part A) in recently boiled water for 10-15 minutes and waiting for it to return to tiptop (runny honey consistency) condition!
- Use 2 parts resin to 1 part hardener by volume (2:1) to ensure a hard finish once set. We advise you measure in millilitres and don't try to be clever with the mixing ratio. By changing it you will alter the properties of the resin, which inevitably means it won't set!
- Stir Part A and Part B together thoroughly for at least 3 minutes - this is a long time... set a timer on your phone. You will notice milkiness when stirring but don't panic - it's completely normal... just stir through it. It's a super-handy way of knowing when your resin is mixed thoroughly!
- Once mixed, fill-it epoxy resin remains at its most liquid for around 4 hours, depending on the temperature of your workspace.
- Epoxy resins tend to heat up when poured in large volumes (i.e. they produce an exothermic reaction), and when poured in teeny tiny volumes there isn't enough mass to generate the reaction, so we advise you to mix no less than 20ml and no more than 12l at a time.
- The maximum depth that fill-it can be safely poured to is 50mm (5cm) in one layer. For deep castings we recommend using an electric fan to cool the resin as it cures.
- Your working space should be between 18 to 25ºC and humidity level below 70% (i.e. do not use in a room with drying laundry, pots and pans boiling or kettles on the go).
- Make sure your resin piece is level and pop any bubbles by hand using a cocktail stick, or use a heat gun or naked flame for a couple of seconds to aid bubble release. Avoid dimpling by holding the blowtorch or heat gun at least 20cm away.
- If cured at around 23ºC, this resin should be touch dry within 3-4 days and fully cured after 21 days. We like to cure our resin makes in the dark (for extra light-fastness) and in a dust-free environment
If you're unsure about anything above, have a question, or just want a read, check out our FAQs here.