Flat Section Silicone Ring Mould

Flat Section Silicone Ring Mould

£4.50
Stock Status: In Stock
various finger sizes
Facebook
Instagram
Youtube
Twitter
Pinterest
You will earn 4 points with this purchase
Information
A simple, shallow Flat Section Silicone Ring Mould for casting resin rings. Bubble free, semi-translucent (so you can see what you're casting) and flexible, this silicone mould is high quality and durable - you shouldn't need a release agent.

This silicone ring mould comes in 6 finger sizes and measures just over 5mm wide on the finger:
  • 16mm inner diameter (Uk finger size K, small)
  • 17mm inner diameter (UK finger size M1/2, medium)
  • 18mm inner diameter (UK finger size P, large)
  • 19mm inner diameter (UK finger size R1/2, extra large)
  • 20mm inner diameter (UK finger size U, XX large)
  • 21mm inner diameter (UK finger size W, XXX large)
These moulds takes approximately 2ml of resin to fill. 

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
Specifications
  • Product Code:
    SM.021.005
  • Shape:
    Round
  • Size:
    18mm diameter
  • Size:
    20mm inner diameter
  • Design:
    Ring
  • Type:
    Jewellery
c