Geometric 3D Gorilla Head Mould

Geometric 3D Gorilla Head Mould

Stock Status: In Stock
dignity & compassion
You will earn 4 points with this purchase
Perfect for quirky fridge magnets, this 3D Geometric Gorilla Head Mould is full of scandi charm. Made with an integral foot (so you can keep it level), this translucent silicone mould is ideal for resin and can also be used for sculpt & cast, soap, gypsum and even concrete (although we haven't tested it with these).

Measurements: 7 x 4.2cm
Depth of mould: 4.9cm

This mould takes approximately 70ml of resin to fill.

Due to the detailed nature of this mould, make sure the resin goes into all the spaces (use a cocktail stick) and demould carefully. To aid bubble release, make sure you warm your resin before use.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    70mm x 42mm x 49mm
  • Type:
  • Design: