Geometric 3D Lion Head Mould

Geometric 3D Lion Head Mould

£4.75
Stock Status: In Stock
majesty & strength
Facebook
Instagram
Youtube
Twitter
Pinterest
You will earn 4 points with this purchase
Information
Perfect for quirky fridge magnets, this 3D Geometric Lion Head Mould is full of scandi charm. Made with an integral foot (so you can keep it level), this translucent silicone mould is ideal for resin and can also be used for sculpt & cast, soap, gypsum and even concrete (although we haven't tested it with these).

Measurements: 7 x 4.2cm
Depth of mould: 4.9cm

This mould takes approximately 50ml of resin to fill.

Due to the detailed nature of this mould, make sure the resin goes into all the spaces (use a cocktail stick) and demould carefully. To aid bubble release, make sure you warm your resin before use.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
Specifications
  • Product Code:
    SM222
  • MPN:
    SM222
  • Shape:
    Themed
  • Dimensions:
    70mm x 42mm x 49mm depth
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product