Geometric Raised Edge Silicone Coaster Mould - Amara

£8.50
Stock Status: In Stock
contemporary lipped dish
Facebook
Instagram
Youtube
Twitter
Pinterest
You will earn 8 points with this purchase
Information

This unique Geometric Raised Edge Coaster Mould - Amara is one of a kind. With a raised lip and flat base you can make a truly unusual resin creation. Use our coat-it resin with alcohol inks and make a wonderful petri dish. Or use fill-it epoxy resin and embed pretty florals for a beautiful botanical design with a crystal clear finish. Named after one of the 3 recent Resin8 babies.

Easy to demould, this flexible mould gives you plenty of space to make glorious effects with resin, alcohol ink, flowers and more.

  • Measurements: 140mm x 130mm, approx 10mm deep
  • Each dish takes approximately 80ml of resin or 135g of JESMONITE to fill.

Petri Art combines resin with alcohol inks to create three dimensional splashes of colour with unpredictable results. Called petri art because it resembles the tiny particles found growing in petri dish experiments, this popular technique is simple to get started with as long as you get the basics right.

If you're using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out, what was the bottom will be the top and heat-resistant up to 90oC! Remember that our Heat-Resistant resin needs between 14-21 days to achieve full cure, so don't place a hot cup on it too early.

If using to make a JESMONITEcoaster, remember to seal the coaster before use with our Protect-It sealant to make it less porous.

How to look after your new mould: top tips from the Resin8 team

Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.

It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.

Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine. 

You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE? Resin-tired moulds make excellent moulds for working with JESMONITE​​​​​​​.  You can find more about this wonderful composite here.

Should you need a little more guidance, our FAQs provide lots of helpful information, as do our YouTube videos. You may also like to join our friendly facebook group for help from our super customers.

Specifications
  • Product Code:
    SM.002.006.001
  • Size:
    135mm x 130mm x 10mm depth
  • Material:
    Silicone Mould
  • Type:
    Coaster
c