Gummy Bear 8 Mould

Gummy Bear 8 Mould

Stock Status: In Stock
pop a screw eyelet in the top
You will earn 6 points with this purchase
This Silicone Gummy Bear Mould makes 8 small teddy bears for making into pendants, mini magnets or dangly flat backed, oversized earrings.

Height of each bear: 21mm
Width: 18mm
Depth of each bear: approx 8mm
This mould takes approximately 20ml of resin to fill. 

Due to the detailed nature of this mould, make sure the resin goes into all the spaces (use a cocktail stick) and demould carefully. To aid bubble release, make sure you warm your resin before use.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • MPN:
  • Shape:
  • Dimensions:
    Bear: 21mm x 18mm x 8mm depth
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product