Large Round Silicone Pen Pot Moulds

Large Round Silicone Pen Pot Moulds

Stock Status: In Stock
delightful desk tidies!
You will earn 18 points with this purchase

Is there anything worse than having someone tell you to note down something super important and not being able to find a pen? Well, with our Large Round Pen Pot Moulds, you can create a fantastical stationery holder to keep all those pesky pens in one place. Or, mix it up and use it to home your tiny succulents or make-up brushes! Experiment with our neon pigment to make your day a little bit brighter everytime you look at this funky make.


  • Finished pots are approx 75mm wide (outside diameter) and 110mm tall. The walls of the pots are 10mm wide. 
  • The moulds take approx 300ml of resin to fill. We'd recommend using fill-it for these! If you would rather use JESMONITE you will need approx 500g to fill this mould.

How to look after your new mould: top tips from the Resin8 team

Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.

It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.

Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine. 

You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE? Resin-tired moulds make excellent moulds for working with JESMONITE​​​​​​​.  You can find more about this wonderful composite here.

  • Product Code:
  • Size:
    60mm across x 50mm high
  • Material:
    Silicone Mould
  • Type:
    Trinket Dishes/Boxes