Chunky and lustrous Metallic Flake in our Summer Mix colourway. Add bright and shiny silver, gold and copper tones to resin coasters, artwork and jewellery for highlights of glamour, and use our metallic flake to create crushed leaf effects and texture on resin art.
Could it get any better? Of course it could! Our metal leaf comes in a recyclable aluminium tin, has large flake sizes, and complements our mica powders and pigments beautifully. Made for surface gilding, these flakes are very flyaway and the contents may settle in the pot on their way to you. Just shake the tub slightly before you open it to awake the flakes from their slumber.
Use tweezers to get the flakes out of the tin (making sure you don't sneeze...) and make sure you are working over a piece of paper that can collect any stray flakes - you won't want to waste any as they're soooooo shiny!
Impossible to weigh (it's light as a feather) - the amount you will receive is what fits in either:
- a 42mm x 19mm tin (see the picture of us holding the tin)
- or a 68mm x 24mm tin.
Top Tip: Add into your mould before pouring in JESMONITE, this will leave a metallic finish on the outer edge when you demould your piece resulting in a fantastic finished look.