Miniature Lobster Mould

Miniature Lobster Mould

Stock Status: In Stock
add to seascapes
You will earn 1 points with this purchase
Stand out from the crowd this summer with a lobster pendant, brooch or even dangly oversized earrings! Our Silicone Miniature Lobster Mould is super detailed and super cute.

Diameter: 36mm at longest point x 20mm at widest point
Depth of mould: approx 2mm

This mould takes approximately 4ml of resin to fill.

Due to the detailed nature of this mould, make sure the resin goes into all the spaces (use a cocktail stick) and demould carefully. To aid bubble release, make sure you warm your resin before use.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • MPN:
  • Shape:
  • Dimensions:
    36mm x 20mm x 2mm
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product