Open Cuff Silicone Bangle Mould

£11.50
Stock Status: In Stock
cuff tastic
Facebook
Instagram
Youtube
Twitter
Pinterest
You will earn 11 points with this purchase
Information
Uber-popular silicone cuff bangle mould. We've traditionally held off selling these as they are quite small... BUT... new trick (thanks to Verdebijoux)... after you've made the resin cuff, warm it up and flex it to change the size. You can make it bigger by pulling it apart, and smaller by closing it up. Perfect.

This high quality silicone mould is semi-translucent, so you'll be able to see the flowers and goodies you're embedding, and has a shiny interior.

Width: 35mm
Thickness: 5mm
Internal diameter: 60mm 

This mould takes approximately 35ml of resin to fill. 

How to look after your new mould: top tips from the Resin8 team

Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.

It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.

Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine. 

You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of Jesmonite? Resin-tired moulds make excellent moulds for working with Jesmonite.  You can find more about this wonderful composite here.

Specifications
  • Product Code:
    SM.018.013
  • Shape:
    Round
  • Size:
    35mm x 5mm
c