A squat, slim round silicone bead mould with planed edges. With a bright, shiny interior, this 16mm Faceted European Silicone Bead Mould will make 6 beads measuring 16mm in diameter, each with a 5.5mm hole through the middle. This silicone mould is high quality and durable - you shouldn't need...
A squat, slim round silicone bead mould with planed edges. With a bright, shiny interior, this 16mm Faceted European Silicone Bead Mould will make 6 beads measuring 16mm in diameter, each with a 5.5mm hole through the middle. This silicone mould is high quality and durable - you shouldn't need a release agent.
Dimensions of each bead - 16mm diameter wide x 6.5mm deep (with a 5.5mm hole through the centre)
You will need to buy 4 or 5mm grommets for this mould - and secure them in place with Araldite Glue
Finished items shown as example only - silver grommets available in pairs here in Sterling Silver (they are not included with this mould)
A set of beads takes approximately 7ml of resin or 15g of JESMONITE® to fill.
How to look after your new mould: top tips from the Resin8® team
Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully. Moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.
It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.
Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.
If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE®? Resin-tired moulds make excellent moulds for working with JESMONITE®. You can find more about this wonderful composite here.
Should you need a little more guidance, our FAQs provide lots of helpful information, as do our YouTube videos. You may also like to join our friendly Facebook group for help from our super customers.