Digital Scales

Resin8®
OA.011.011.001
43 In stock
Digital Scales
$14.00
Our range of Digital Scales are just the ticket for jewellers wishing to weigh out small quantities of DOME-IT resin, or artists weighing large quantities of COAT-IT Resin. Our 3 types of scale each measure: The Pocket sized scales weigh from 0.01g to 200g The Medium scales weigh from 0.1g to 500g The Large scales weigh... Read More
Size:
$14.00
customers are viewing this product

Our range of Digital Scales are just the ticket for jewellers wishing to weigh out small quantities of DOME-IT resin, or artists weighing large quantities of COAT-IT Resin.

Our 3 types of scale each measure:

  • The Pocket sized scales weigh from 0.01g to 200g
  • The Medium scales weigh from 0.1g to 500g
  • The Large scales weigh from 0.1g to 2000g (2kg)

Each set of scales ill require 2 x AAA batteries (not included). The outer measurements of these scales are 110x130mm. They come with a hard protective weighing scale shield (remove before using) and handy case that can be upturned and also used as a tray. Please remove any protective film before use to ensure the scales measure accurately. The scales also have a handy counting function (PCS button).

With an intelligent auto shutdown function (that times out after around 2-3 minutes when nothing is being weighed) these scales allow you to measure in grams, ounces, carats, pennyweights (!) and grains (!!).

Tare Function:

  • Turn the scales on
  • Wait until the 0.00 value is displayed and place an empty mixing cup on the weighing tray
  • Press TARE and wait until 0.0! is displayed
  • Now place the full mixing cup you wish to weigh

Calibration Function:

  • Turn the scales on
  • Wait until the 0.00 value is displayed and then press and hold the M button for 3 seconds
  • The display will show the default calibration weight
  • If you don't have the calibration weight press the M button again to choose other weights
  • Once you have confirmed the calibration weight press the ON/OFF button and it will show CAL and the required calibration weight
  • Place something of that weight on the scales and the display will show PASS!
  • Remove the calibration weight and press ON/OFF.

Counting Function:

  • Turn the scales on
  • Press and hold the PCS button until you see the word PCS displayed on the screen
  • Press the M button to choose a sample count
  • Place the sample amount (e.g. 25 pieces) of the quantity you wish to weigh on the weighing tray
  • Press PCS to count the overall quantity.
You have successfully subscribed!
This email has been registered