SILICONE MOULD Orgonite Cone

Resin8®
SM.004.005.002
26 In stock
Homeware Moulds
$6.00
This high quality semi-translucent Orgonite Silicone Mould makes a resin cone, perfect for use as an orgonite. Choose from 6, 5 or 3cm. Orgonite is essentially a 3-d resin shape filled with quartz crystals and metals that harmonise energy. For a true orgone shape you should use a 50:50 mix... Read More
Size:
$6.00
customers are viewing this product

This high quality semi-translucent Orgonite Silicone Mould makes a resin cone, perfect for use as an orgonite. Choose from 6, 5 or 3cm.

Orgonite is essentially a 3-d resin shape filled with quartz crystals and metals that harmonise energy. For a true orgone shape you should use a 50:50 mix of resin and metal shavings and add a quartz crystal to give off a charge when the resin cures.

  • The 6cm mould is 7.5mm deep and takes approximately 60ml of resin or 100g of JESMONITE to fill
  • The 5cm mould is 6.5cm deep and takes approximately 40ml of resin or 70g of JESMONITE to fill.
  • The 3cm mould is 3.5cm deep and takes approximately 8ml of resin or 15g of JESMONITE to fill.

How to look after your new mould: top tips from the Resin8® team

Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully. Moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.

It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.

Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.

You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE®? Resin-tired moulds make excellent moulds for working with JESMONITE®​​​​​​​. You can find more about this wonderful composite here.

Should you need a little more guidance, our FAQs provide lots of helpful information, as do our YouTube videos. You may also like to join our friendly Facebook group for help from our super customers.

You have successfully subscribed!
This email has been registered