A Spherical Silicone Bead Mould made of high quality flexible silicone. With a bright, shiny interior, this bead mould will make 6 orb style beads measuring 12mm or 16mm in diameter, each with a hole through the middle.
Dimensions of each bead - 12mm or 16mm diameter:
- A set of 12mm beads takes approximately 10ml of resin or 20g of JESMONITE® to fill.
- A set of 16mm beads takes approximately 40ml of resin or 70g of JESMONITE® to fill.
Top Tip: Demould these beads in warm soapy water. This will make the demould easier and therefore prolong the life of your mould!
We think you might be searching for mold (if you're American) or moldes (if you're Spanish) and even silcone or mild (if you've mispselt it) so we hope you will find what you're looking for now!
How to look after your new mould: top tips from the Resin8® team
When you first receive your new mould, we always recommend giving it a little wash with warm soapy water and leaving it to full dry before its first use to make sure it is super clean before pouring your make.
Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully. Strong UV light can damage your silicone moulds so make sure to keep them away from direct sunlight. Moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. You may want to leave a casting in your mould when storing it away for longer periods of time, as this will help retain the shape of the mould. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.
It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.
Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff, or glitters - doing this will remove the interior shine within your mould.
If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE®? Resin-tired moulds make excellent moulds for working with JESMONITE®. You can find more about this wonderful composite here.
Should you need a little more guidance, our FAQs provide lots of helpful information, as do our YouTube videos. You may also like to join our friendly Facebook group for help from our super customers.