Resin8 Protect-It is a high quality clear stone sealant that can be used on Jesmonite Sculpt & Cast coasters and homewares to give it a splash-proof coating. Quick drying and suitable for internal use, it is UV resistant and helps to protect against heat, moisture, oil, grease and stains. Apply by brush or roller to provide a splash-resistant finish for Jesmonite Sculpt & Cast objects.
- NOT suitable for use with epoxy resin
- Volume: choice of 240ml or 500ml
- UV resistant
- Provides a splashproof protection (not a fully-waterproof seal)
- Coverage: approx 1m2 per bottle, depending on the porosity of the surface
- Store above 5oC. Apply at room temperature (over 10oC)
How to apply:
- Ensure that all surfaces to be sealed are clean, dry, and free from any grease or oil
- Wear nitrile gloves (this product can cause skin irritation)
- Apply a thin coat of Resin8 Protect-it using a high quality brush or clean roller
- Apply a further two coats before allowing the first coat to dry
- Leave to cure for at least 48 hours
- We suggest applying a minimum of 3 thin coats to create a protective layer
NB. Protect-It is not suitable for surfaces that have been previously treated with a silicone or sterate based water-repellent. Keep in mind this product is made for sealing Jesmonite, but may interfere with other additives or embellishments in your mixture.
You can download the full MSDS on our Health & Safety page. Keep out of reach of children. Do not ingest. Do not get in eyes, on skin or on clothing. Wear protective gloves, eye protection and face protection. IF SWALLOWED immediately seek medical advice or call a poison centre. IF ON SKIN wash with plenty of soap and water. IF IN EYES rinse cautiously with water for several minutes.