Rectangular Soap Dish Silicone Mould

Rectangular Soap Dish Silicone Mould

Stock Status: In Stock
heavyweight mould
You will earn 22 points with this purchase
Made for concrete, this silicone Rectangular Soap Dish Mould is also perfect for making your very own resin soap holders. Rectangular in shape and with 3 pre-drilled water escape holes, this bright pink silicone mold allows you to make a beautiful freestanding concave soap dish. Gift one to a friend or make plenty to sell at your local craft fair... just be sure to keep one for yourself.

Each soap dish mould needs approx 220ml of resin. We suggest using our slowcure epoxy resin - it is the hardest of our epoxy resins and has minimal bubbles.

Measurements: 13.5cm long x 9.6cm wide x 2.3cm high (approx)

Our silicone moulds can be re-used time and again providing they are looked after well. Keep them in the bag they come to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Dimensions:
    13.5cm long x 9.6cm wide x 2.3cm high (approx)