Resin8 Sculpt & Cast Liquid and Base - Mini Kit
Resin8 Sculpt & Cast Liquid and Base - Mini Kit
Resin8 Sculpt & Cast Liquid and Base - Mini Kit
Resin8 Sculpt & Cast Liquid and Base - Mini Kit
Resin8 Sculpt & Cast Liquid and Base - Mini Kit

Resin8 Sculpt & Cast Liquid and Base - Mini Kit

£11.49
Stock Status: In Stock
200g powder / 80g liquid
Facebook
Instagram
Youtube
Twitter
Pinterest
You will earn 11 points with this purchase
Information
RESIN8 SCULPT & CAST BASE AND LIQUID - Mini Kit
  • 200g BASE and 80g LIQUID - in plastic containers
  • Mix Ratio: 2.5 parts BASE : 1 part LIQUID
  • Pot life: 20 minutes (can be doubled using RETARDER)
Resin8 Sculpt & Cast is a unique, non-toxic acrylic resin & mineral system for casting. Popular in interior design, this versatile texture medium can be dyed, cast, polished and combined with other materials to create tactile and beautiful jewellery, sculpture and objets d'art. Sculpt & Cast is the same as Jesmonite.

Made up of 2 parts,a mineral resin powder and an acrylic liquid, Resin8 Sculpt & Cast is very user friendly because of its non-toxicity - it is solvent free and contains no VOCs. You can use this eco-resin to create beautiful jewellery in moulds or in ready made jewellery mounts - take a look at the examples of colours and finished jewellery we have made.

Sculpt & Cast comes with its own range of colour pigments although you can also use acrylic inks to give a range of dense opaque colours - remember though that as Resin8 Sculpt & Cast is off-white, any colour mixed in will lighten (therefore meaning you will need more colour!). 

The standard mix ratio for Resin8 Sculpt & Cast is by weight as follows - 2.5 parts BASE : 1 part LIQUID. For an easy calculation we suggest 10g of BASE and 4g of LIQUID. You mist ensure that the BASE and LIQUID are mixed fully together - we suggest mixing for up to 2 minutes.

Handy calculations:
  • 5g powder = 2g liquid
  • 10g powder = 4g liquid
  • 20g powder = 8g liquid
Resin8 Sculpt & Cast has a pot life of 20 minutes, which can be doubled by using a RETARDER. Resin8 Sculpt & Cast is quite thin but can be made more viscous by adding THIXOTROPE - this allows the product to be used on curved surfaces.

Instructions for working with Resin8 Sculpt & Cast resin can be found here and a technical data sheet can be downloaded here. Full MSDS available on request.
Specifications
  • Product Code:
    JES001
  • Weight/Volume:
    200g Base, 80g Liquid
  • Mix Ratio:
    2.5 parts Base : 1 part Liquid
  • Pot Life:
    20 minutes
  • Cure Time:
    12-24 hours
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product