Seaside Shells Earring & Pendant Collection Mould

Seaside Shells Earring & Pendant Collection Mould

Stock Status: Sold Out
bucket and spade at the ready
Oh no, we've just run out... sorry x
You will earn 3 points with this purchase
Buckets and spades at the ready, head off to a tranquil sandy beach . . . if only through your jewellery! This Gem Earring Collection Mould makes 2 pairs of coordinating charms for earrings and pendants. In pretty scallop and starfish shapes, each piece is domed and has a lovely shiny finish. Turn into quirky earrings by gluing on flat pad ear posts and attach bails to complete your pendants. Alternatively, use these pieces as they are for some little pretty keepsake charms.   

Each mould makes 6 pieces:
- Earring measurements: 15mm x 4mm 
- Large Starfish: 40mm x 8mm
- Large Scallop Shell: 35mm x 7mm

Fittings not included. 

This mould takes approximately 10ml of resin to fill. We recommend using coat-it 1 to 1 resin for this mould.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    15mm x 4mm & 40mm x 8mm
  • Type:
  • Design:
    Earring & Pendant