SECONDS 40mm Domed Heart Pendant Mould - No Drill

SECONDS 40mm Domed Heart Pendant Mould - No Drill

Stock Status: In Stock
40mm wide
You will earn 1 points with this purchase
NB. This round of moulds have a slight fault to the top edge of the heart. There is an extremely small (yet annoying) extra piece of silicone in the top right of the heart (see image). Because of this we have reduced the price. It is possible (with care) to remove the extra piece of silicone with a craft knife, and then a small amount of polishing work to the finished casting should rectify any issues.

This domed heart pendant mould is the perfect size. Not too big, not too small - just right for making stunning translucent resin necklaces to sell at craft fairs. Even better - it comes with a hanging loop so no need to drill one! Try adding words printed on transparencies and filling with clear resin and glitter.

Dimensions: 40mm x 35mm x 3mm depth. 
This mould takes approximately 10ml of resin to fill. 

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    40mm x 35mm x 3mm depth
  • Material:
    Silicone Mould
  • Type:
  • Design: