Silicone Cube Mould

Silicone Cube Mould

Stock Status: In Stock
Choice of sizes
You will earn 8 points with this purchase

This gorgeous Silicone Cube Mould makes a paperweight or decorative ornament with beautifully shiny sides. You can see what you're casting due to the mould's transparency, making it easy to create intricate layers or encase exciting objects.

Choose from:

  • 20mm (takes approximately 10ml of resin to fill)
  • 25mm (17ml)
  • 35mm (42ml)
  • 40mm (70ml)
  • 50mm (140ml)
  • 65mm (310ml)
  • 100ml (approx 500ml)

Now in 100mm! Bigger and better! We advise that, because this mould is so massive, you put some books on the sides of your resin-filled mould as a support, to stop the edges bulging out once it's full of resin.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.

  • Product Code:
  • Shape:
  • Size:
    50mm x 50mm
  • Design:
  • Type:
    Cubes & Spheres