Silicone Hair Comb Mould
Silicone Hair Comb Mould
Silicone Hair Comb Mould
Silicone Hair Comb Mould
Silicone Hair Comb Mould

Silicone Hair Comb Mould

£3.95
Stock Status: In Stock
fun and functional!
Facebook
Instagram
Youtube
Twitter
Pinterest
You will earn 3 points with this purchase
Information

Our new Hair Comb Moulds create a fun little craft that can be used time and time again to replace those pesky hair combs that always go missing! Make one for your handbag, your dressing table, and a friend! We decided to go groovy with ours and filled the moulds with colours from our pastel bundle, and went for a completely different vibe on another using black opaque pigment and aurora flakes

Dimensions:

  • Each prong is approx 2-3mm wide
  • Little comb (no handle) - approx 90mm x 50mm x 4mm depth
  • Large comb (with handle) - approx 175mm x 50mm x 4mm depth. The handle itself is approx 60mm long and 25mm wide
  • It will take approximately 20-30ml of resin to fill this mould

Top tip: use a toothpick or mixing stick to push the resin into the end of the prongs to avoid those annoying air bubbles!

How to look after your new mould: top tips from the Resin8 team

Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.

It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.

Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine. 

You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE? Resin-tired moulds make excellent moulds for working with JESMONITE.  You can find more about this wonderful composite here.

Specifications
  • Product Code:
    SM.004.035.001
  • Size:
    90x50mm
  • Type:
    Other
c