Silicone Pen Moulds
Silicone Pen Moulds
Silicone Pen Moulds
Silicone Pen Moulds
Silicone Pen Moulds

Silicone Pen Moulds

Stock Status: In Stock
choose from 3 different styles!
You will earn 6 points with this purchase

Our Silicone Pen Moulds are a new way of making work or school more fun. With three different styles to choose from, and ink refills available to purchase also, you can make as many pens as you want!

These can be filled with just about any of our resins although we recommend coat-it resin. Fill with a bright and shimmering colour such as mica powder or go petri-tastic with our alcohol ink. Let's face it, we all love a bit of sparkle though so cram it full of eco-glitter for a pen to make your work colleagues jealous.

  • Approx dimensions:13.5mm wide, 140mm high, inner width 9.5mm
  • REMEMBER, if you use clear resin you will be able to see the ink inside the pen! To make pens you need to pop the ink in the mould first - using the small peg (which is inside the end of the mould) at one end to secure it in place, then fill with resin. 

How to look after your new mould: top tips from the Resin8 team

Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.

It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.

Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine. 

You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE? Resin-tired moulds make excellent moulds for working with JESMONITE.  You can find more about this wonderful composite here.

  • Product Code:
  • Size:
    13.5mm wide, approx 140mm high
  • Material:
    Silicone Mould
  • Type: