Silicone Pyramid Orgonite Mould

Silicone Pyramid Orgonite Mould

Stock Status: In Stock
create environmental vibrations
You will earn 10 points with this purchase
This high quality semi-translucent Pyramid Mould makes a perfect resin casting, perfect for use as an orgonite. Choose from 6cm, 5cm or 3cm.
  • The 6cm mould is 6.3cm deep, and takes approximately 90ml of resin of 160g of JESMONITE to fill.
  • The 5cm mould is 5.5cm deep, and takes approximately 50ml of resin or 85g of JESMONITE to fill.
  • The 3cm mould is 3.5cm deep, and takes approximately 10ml of resin or 20g of JESMONITE to fill.
Orgonite is essentially a 3-d resin shape filled with quartz crystals and metals that harmonise energy. For a true orgone shape you should use a 50:50 mix of resin and metal shavings and add a quartz crystal to give off a charge when the resin cures.

How to look after your new mould: top tips from the Resin8 team

Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.

It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.

Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine. 

You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE? Resin-tired moulds make excellent moulds for working with JESMONITE​​​​​​​.  You can find more about this wonderful composite here.

  • Product Code:
  • Size:
    50mm diameter x 63mm depth
  • Material:
    Silicone Mould
  • Type: