Resin8 Silicone Simple Flat Heart Mould

Simple Flat Silicone Heart Mould

Stock Status: In Stock
5cm x 4.5cm
You will earn 2 points with this purchase
This gorgeously Simple Flat Heart Mould is a high quality, semi-translucent mould with a shiny interior, providing a beautiful and professional finish. It can be used to make an oversized pendant, hanging decoration, fridge magnet or even a keyring.

Dimensions: 50mm x 45mm
This mould takes approximately 10ml of resin to fill.  

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Dimensions:
    50mm x 45mm