Simple Silicone Cross Mould

Simple Silicone Cross Mould

Stock Status: Sold Out
simple yet stylish
Oh no, we've just run out... sorry x
You will earn 2 points with this purchase
This Simple Silicone Cross Mould has a shiny interior and makes a straight sided resin cross. Go glam with the petri alcohol ink effect or use bold and vibrant colours for a striking effect.

Measurements: 35mm long x 25mm wide x 5mm deep

This mould takes approximately 8ml of resin to fill.

You will be able to use your silicone mould over and over again provided you look after it and treat it with care. It is translucent so you can see what you are filling the mould with, and you get what you pay for - superior quality, ease of use and minimal need for finishing. 

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Dimensions:
    35mm x 25mm x 5mm