Beautiful Sterling Silver 4mm Bead Cores to be used at either end of beads made with our European Bead Moulds. Easy to use, just glue them in place with Araldite, these bead ends come in packs of 2 and are made to match our plain european bead mould or faceted european bead mould.
- Made from 925 Sterling Silver (one grommet is stamped, one isn't)
- Measurements - Inner diameter: 4mm; outer diameter: 9.2mm
- Sold in pairs
- Weight: 2.6g per pair
Please note: these bead cores are not compatible with Pandora charm bracelets, the inner diameter of the finished bead will be too small to fit on to the bracelet.
How to care for your precious metal jewellery:
Wrapping sterling silver jewellery and findings in acid-free tissue paper will protect them from the atmosphere and mean they are less likely to tarnish. If your sterling silver has tarnished this could be due to perspiration while wearing the piece, a reaction caused by cosmetics & perfume, or even from chemicals that occur naturally in the air. The black tarnish can easily be removed using an impregnated silver polishing cloth, although avoid rubbing any resin surfaces with a silver cloth.
- For yourself: Each time you wear a piece of sterling silver jewellery you should give it a quick polish before you put it away with a silver cloth. Wrap it in acid-free tissue paper and store safely in a box.
- For makers: When your resin piece is finished and ready to be sold polish the silver surface carefully using a silver polishing cloth. We suggest wearing cotton gloves while polishing (as skin is acidic and will cause premature tarnishing, not to mention you will leave fingerprints all over the resin and the silver), wrapping the piece in acid-free tissue paper and putting straight into a biodegradable ziplock bag or box to prevent air getting to the piece.