The Beast Beneath Mould - No Drill

The Beast Beneath Mould - No Drill

Stock Status: In Stock
a tangle of octopi
You will earn 4 points with this purchase
Create squirming octopuses with skulls for bodies with this swashbuckling Beast Beneath Mould. Go detailed and fill the octopus with one colour, the skull with another, use glitter for the frame and then back it with black! This pendant mould comes with a pre-drilled loop - no drilling required!

Diameter: 45mm
Depth of mould: approx 2mm

This mould takes approximately 10ml of resin to fill.

Due to the detailed nature of this mould, make sure the resin goes into all the spaces (use a cocktail stick) and demould carefully. To aid bubble release, make sure you warm your resin before use.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Dimensions:
    45mm diameter