Tiny Triples Earring & Pendant Mould

Tiny Triples Earring & Pendant Mould

Stock Status: In Stock
Make 4 pairs of earrings
You will earn 4 points with this purchase
This Tiny Triples Earring & Pendant Mould allows you to make four different shapes of earrings, 3 at a time! Create a pair of earrings plus a matching gem for a hairclip, brooch or delicate necklace. 

Each mould makes 12 pieces ranging from 12mm to 15mm long. 
We suggest using earring pads which are available from our site.
One round and one square shape in each mould are very slightly larger that the other two parts of the same shape.

This mould takes approximately 2ml of resin to fill. 

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • Shape:
  • Size:
    50mm x 66mm
  • Material:
    Silicone Mould
  • Type:
  • Design: