Twin Classic Car Mould

Twin Classic Car Mould

Stock Status: In Stock
WAS £6.40
You will earn 4 points with this purchase
A high quality translucent Twin Classic Car Mould for making brooches, fridge magnets and oversized pendants. With flat backs, this super-detailed silicone mould makes 2 classic vehicles. Think Dodge, Chevrolet and Bugatti.

Limited Edition - 5 only!

Each car measures approx 62 x 21mm and takes approximately 10ml of resin to fill. 

Due to the detailed nature of this mould, make sure the resin goes into all the spaces (use a cocktail stick) and demould carefully. To aid bubble release, make sure you warm your resin before use.

Our silicone moulds can be re-used time and again providing they are looked after well. Keep it in the bag it comes to you in, don't use a flame near the mould (use a heat gun instead) and be careful when de-moulding - try not to scratch the mould with long nails or bend it out of shape too much. 

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine.
  • Product Code:
  • MPN:
  • Shape:
  • Dimensions:
    62mm x 21mm
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product