Zig Zag Trinket Pot Silicone Mould - With or Without Lid

Zig Zag Trinket Pot Silicone Mould - With or Without Lid

Stock Status: In Stock
fun and funky designs!
You will earn 12 points with this purchase

Tidy up and organise your dressing table with this fantastical Zig Zag Pot Mould. Available with or without a lid.

With the pot only - this mould is perfect for holding your make-up brushes without damaging those delicate bristles, or with the lid - use to hold your little treasures safely and all together.

We recommend using our fill-it resin with an assortment of our transparent tints and a selection of our dried flowers for a summery floral finish!

  • Approx 100ml of resin or 170g of JESMONITE for pot without lid, and approx 160ml of resin or 270g of JESMONITE in total is needed if you want to fill the lid as well.
  • The pot itself is approx 75mm wide and 70mm tall. The inside of the pot measures approx 75mm wide and 55mm deep, and the lid measures approx 75mm wide and 60mm tall. 
  • We recommend using fill-it resin for this to get into all the little nooks and crannies!

How to look after your new mould: top tips from the Resin8 team

Our silicone moulds can be used multiple times - to get the very best resin results it is important to care for them perfectly. Keep your mould in the bag it comes to you in and store carefully moulds do not like to be stacked or kept contained in a box with other items, this will result in the mould losing its shape. Moulds that are more complex to demould from will not last as long as straightforward, plain moulds.

It is best to use a heat tool such as an embossing craft gun to rid bubbles from your creations, naked flames can damage the outer edges of your mould. Take extra care when de-moulding your creation, pay special attention to not scratch the interior of your mould with long fingernails.

Any residue left in your mould once you have finished using it can be brushed out with a soft bristled brush such as a watercolour paint brush. Do not use sticky tape to de-tack dust, fluff or glitters - doing this will remove the interior shine within your mould.

If your casting comes out dull it could be that the mould has come to the end of its life (or that the mould doesn't have a shiny interior surface). You can keep using moulds that are past their best - it just takes a little more effort. Add a thin layer of resin to the casting or use polish and a cloth to bring up the shine. 

You might like to consider using moulds that have past their best for another exciting craft. How about exploring the wonderful world of JESMONITE? Resin-tired moulds make excellent moulds for working with JESMONITE​​​​​​​.  You can find more about this wonderful composite here.

  • Product Code:
  • Size:
    75mm x 70mm
  • Material:
    Silicone Mould
  • Type:
    Trinket Dishes/Boxes